Sports

The art of protection – inside the Formula 1 helmet industry

The F1 helmet is a wonderful marriage of science and beauty.

Constructed using advanced composite materials, including carbon fiber, it should be incredibly strong while remaining light enough to reduce strain on the driver’s neck.

Visors, ventilation systems, fireproof membranes, communication equipment, a straw-like drinking system and carefully designed storage systems all contribute to its performance.

Today, F1 helmets must withstand a 225g steel projectile fired at 155mph, a 790C flame and high impact and crushing tests. It’s a no-compromise developer.

Schuberth works closely with motorsport’s governing body the FIA.

Dall’Oglio says: “There is a continuous exchange of information. We repeat the tests regularly. We are also working on the future regulation of helmets.

“Since there is a very small structural or superficial defect, the carbon shell cannot be used. This could be ignition, cooking or a tooling problem. So it would be over €1,000 (£850) of material, and all those man-hours would be gone.”

Arai, Bell and Stilo are the other three leading manufacturers of F1 helmets.

Dall’Oglio says: “We all have the same problems, and in the end, we protect the drivers. So, the responsibility is heavy for all of us.

“It’s fun to work with drivers, but it’s also a big responsibility.”

When I visit, production is stopped and the team gathers to solve the problem. Thankfully this happens rarely – and most helmet shells are taken to the next station: a water jet cutting system with a “needle” to cut the water into the hard carbon of the rock.

It’s 4,000 bars of pressure, like a knife in warm butter, to create a narrow opening, six inches at its highest point.

“It’s smart, because you don’t use mechanical power when you wear a helmet,” Dall’Oglio explained.

The cut shell is then taken to what they call a “jigsaw” – assembly area.

Dall’Oglio says: “The outer shell is made of about 100 pieces. Now we add another 100 pieces, depending on the type of aerodynamic parts we need to add. In total, we can say that a few hundred pieces make a helmet.”

Once assembled, the hat goes to the pilot designer.

A helmet can be a driver’s signature. From the colors of the iconic Brazilian Senna to Schumacher’s red Ferrari, the designs are miniature works of art.

Combining intricate graphics, special paintwork and personal touches, each livery tells a story, celebrating a driver’s legacy, family or defining moments.

But while the fancy designs look good, they can cause a headache for the Schio team.

“The helmet weighs about 1.4 kg, depending on the decoration, and the aerodynamic specifications,” said Dall’Oglio.

“We try to work hard to remove 20, 30 grams from the top helmets, and the driver adds a decoration of 80 or 70 grams. It’s always a small conversation with the driver and the designer, but in the end, it’s their decision.”

Dall’Oglio is proud of the company’s relationship with Verstappen, who is very good at providing feedback to drive improvements.

“We continue to cultivate it, but it’s like a happy marriage,” he said.

The helmets produced by Dall’Oglio, his colleagues, and other companies are extraordinary pieces of design and engineering, but the greatest achievement will never be the paint job, the carbon-fibre finish or the name emblazoned on the sides.

Thoso smiles knowingly. It’s a life they’re helping to save, along with a self-driving car.

Additional reporting by Gerhard Schiede.


Source link

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button